The previous article on Audio Worklet detailed the basic concepts and usage. Since its launch in Chrome 66 there have been many requests for more examples of how it can be used in actual applications. The Audio Worklet unlocks the full potential of WebAudio, but taking advantage of it can be challenging because it requires understanding concurrent programming wrapped with several JS APIs. Even for developers who are familiar with WebAudio, integrating the Audio Worklet with other APIs (e.g. WebAssembly) can be difficult.
This article will give the reader a better understanding of how to use the Audio Worklet in real-world settings and to offer tips to draw on its fullest power. Be sure to check out code examples and live demos as well!
Recap: Audio Worklet
Before diving in, let's quickly recap terms and facts around the Audio Worklet system which was previously introduced in this post.
- BaseAudioContext: Web Audio API's primary object.
- Audio Worklet: A special script file loader for the Audio Worklet operation. Belongs to BaseAudioContext. A BaseAudioContext can have one Audio Worklet. The loaded script file is evaluated in the AudioWorkletGlobalScope and is used to create the AudioWorkletProcessor instances.
- AudioWorkletGlobalScope : A special JS global scope for the Audio Worklet operation. Runs on a dedicated rendering thread for the WebAudio. A BaseAudioContext can have one AudioWorkletGlobalScope.
- AudioWorkletNode : An AudioNode designed for the Audio Worklet operation. Instantiated from a BaseAudioContext. A BaseAudioContext can have multiple AudioWorkletNodes similarly to the native AudioNodes.
- AudioWorkletProcessor : A counterpart of the AudioWorkletNode. The actual guts of the AudioWorkletNode processing the audio stream by the user-supplied code. It is instantiated in the AudioWorkletGlobalScope when a AudioWorkletNode is constructed. An AudioWorkletNode can have one matching AudioWorkletProcessor.
Using Audio Worklet with WebAssembly
WebAssembly is a perfect companion for AudioWorkletProcessor. The combination of these two features brings a variety of advantages to audio processing on the web, but the two biggest benefits are: a) bringing existing C/C++ audio processing code into the WebAudio ecosystem and b) avoiding the overhead of JS JIT compilation and garbage collection in the audio processing code.
The former is important to developers with an existing investment in audio processing code and libraries, but the latter is critical for nearly all users of the API. In the world of WebAudio, the timing budget for the stable audio stream is quite demanding: it is only 3ms at the sample rate of 44.1Khz. Even a slight hiccup in the audio processing code can cause glitches. The developer must optimize the code for faster processing, but also minimize the amount of JS garbage being generated. Using WebAssembly can be a solution that addresses both problems at the same time: it is faster and generates no garbage from the code.
The next section describes how WebAssembly can be used with an Audio Worklet and the accompanied code example can be found here. For the basic tutorial on how to use Emscripten and WebAssembly (especially the Emscripten glue code), please take a look at this article.
It all sounds great, but we need a bit of structure to set things up properly. The first design question to ask is how and where to instantiate a WebAssembly module. After fetching the Emscripten's glue code, there are two paths for the module instantiation:
- Instantiate a WebAssembly module by loading the glue code into the
- Instantiate a WebAssembly module in the main scope, then transfer the module via the AudioWorkletNode's constructor options.
The decision largely depends on your design and preference, but the idea is that the WebAssembly module can generate a WebAssembly instance in the AudioWorkletGlobalScope, which becomes an audio processing kernel within an AudioWorkletProcessor instance.
For pattern A to work correctly, Emscripten needs a couple of options to generate the correct WebAssembly glue code for our configuration:
-s BINARYEN_ASYNC_COMPILATION=0 -s SINGLE_FILE=1 --post-js mycode.js
These options ensure the synchronous compilation of a WebAssembly module in the
AudioWorkletGlobalScope. It also appends the AudioWorkletProcessor's class
mycode.js so it can be loaded after the module is initialized.
The primary reason to use the synchronous compilation is that the promise
audioWorklet.addModule() does not wait for the resolution of
promises in the AudioWorkletGlobalScope. The synchronous loading or compilation
in the main thread is not generally recommended because it blocks the other
tasks in the same thread, but here we can bypass the rule because the
compilation happens on the AudioWorkletGlobalScope, which runs off of the main
for the more info.)
The pattern B can be useful if asynchronous heavy-lifting is required. It utilizes the main thread for fetching the glue code from the server and compiling the module. Then it will transfer the WASM module via the constructor of AudioWorkletNode. This pattern makes even more sense when you have to load the module dynamically after the AudioWorkletGlobalScope starts rendering the audio stream. Depending on the size of the module, compiling it in the middle of the rendering can cause glitches in the stream.
WASM Heap and Audio Data
WebAssembly code only works on the memory allocated within a dedicated WASM heap. In order to take advantage of it, the audio data needs to be cloned back and forth between the WASM heap and the audio data arrays. The HeapAudioBuffer class in the example code handles this operation nicely.
There is an early proposal under discussion to integrate the WASM heap directly into the Audio Worklet system. Getting rid of this redundant data cloning between the JS memory and the WASM heap seems natural, but the specific details need to be worked out.
Handling Buffer Size Mismatch
An AudioWorkletNode and AudioWorkletProcessor pair is designed to work like a regular AudioNode; AudioWorkletNode handles the interaction with other codes while AudioWorkletProcessor takes care of internal audio processing. Because a regular AudioNode processes 128 frames at a time, AudioWorkletProcessor must do the same to become a first-class citizen. This is one of the advantages of the Audio Worklet design that ensures no additional latency due to internal buffering is introduced within the AudioWorkletProcessor, but it can be a problem if a processing function requires a buffer size different than 128 frames. The common solution for such case is to use a ring buffer, also known as a circular buffer or a FIFO.
Here's a diagram of AudioWorkletProcessor using two ring buffers inside to accommodate a WASM function that takes 512 frames in and out. (The number 512 here is arbitrarily picked.)
The algorithm for diagram would be:
- AudioWorkletProcessor pushes 128 frames into the Input RingBuffer from its Input.
- Perform the following steps only if the Input RingBuffer has greater
than or equal to 512 frames.
- Pull 512 frames from the Input RingBuffer.
- Process 512 frames with the given WASM function.
- Push 512 frames to the Output RingBuffer.
- AudioWorkletProcessor pulls 128 frames from the Output RingBuffer to fill its Output.
As shown in the diagram, Input frames always get accumulated into Input RingBuffer and it handles buffer overflow by overwriting the oldest frame block in the buffer. That is a reasonable thing to do for a real-time audio application. Similarly, the Output frame block will always get pulled by the system. Buffer underflow (not enough data) in Output RingBuffer will result silence causing a glitch in the stream.
This pattern is useful when replacing ScriptProcessorNode (SPN) with AudioWorkletNode. Since SPN allows the developer to pick a buffer size between 256 and 4096 frames, so the drop-in substitution of SPN with AudioWorkletNode can be difficult and using a ring buffer provides a nice workaround. A audio recorder would be a great example that can be built on top of this design.
However, it is important to understand that this design only reconciles the buffer size mismatch and it does not give more time to run the given script code. If the code cannot finish the task within the timing budget of render quantum (~3ms at 44.1Khz), it will affect the onset timing of subsequent callback function and eventually cause glitches.
Mixing this design with WebAssembly can be complicated because of memory management around WASM heap. At the time of writing, the data going in and out of WASM heap must be cloned but we can utilize HeapAudioBuffer class to make memory management slightly easier. The idea of using user-allocated memory to reduce redundant data cloning will be discussed in the future.
The RingBuffer class can be found here.
WebAudio Powerhouse: Audio Worklet and SharedArrayBuffer
The last design pattern in this article is to put several cutting edge APIs into one place; Audio Worklet, SharedArrayBuffer, Atomics and Worker. With this non-trivial setup, it unlocks a path for existing audio software written in C/C++ to run in a web browser while maintaining a smooth user experience.
The biggest advantage of this design is being able to use a DedicatedWorkerGlobalScope solely for audio processing. In Chrome, WorkerGlobalScope runs on a lower priority thread than the WebAudio rendering thread but it has several advantages over AudioWorkletGlobalScope . DedicatedWorkerGlobalScope is less constrained in terms of the API surface available in the scope. Also you can expect better support from Emscripten because the Worker API has existed for some years.
SharedArrayBuffer plays a critical role for this design to work efficiently. Although both Worker and AudioWorkletProcessor are equipped with asynchronous messaging (MessagePort), it is suboptimal for real-time audio processing because of repetitive memory allocation and messaging latency. So we allocate a memory block up front that can be accessed from both threads for fast bidirectional data transfer.
Shared States and Atomics
When using a shared memory for audio data, the access from both sides must be
coordinated carefully. Sharing atomically accessible states is a solution for
such problem. We can take advantage of
Int32Array backed by a SAB for this
Synchronization mechanism: SharedArrayBuffer and Atomics
Each field of the States array represents vital information about the shared
buffers. The most important one is a field for the synchronization
REQUEST_RENDER). The idea is that Worker waits for this field to be touched
by AudioWorkletProcessor and process the audio when it wakes up. Along with
SharedArrayBuffer (SAB), Atomics API makes this mechanism possible.
Note that the synchronization of two threads are rather loose. The onset of
Worker.process() will be triggered by
method, but the AudioWorkletProcessor does not wait until the
is finished. This is by design; the AudioWorkletProcessor is driven by the audio
callback so it must not be synchronously blocked. In the worst case scenario the
audio stream might suffer from duplicate or drop out but it will eventually
recover when the rendering performance is stabilized.
Setting Up and Running
As shown in the diagram above, this design has several components to arrange: DedicatedWorkerGlobalScope (DWGS), AudioWorkletGlobalScope (AWGS), SharedArrayBuffer and the main thread. The following steps describe what should happen in the initialization phase.
- [Main] AudioWorkletNode constructor gets called.
- Create Worker.
- The associated AudioWorkletProcessor will be created.
- [DWGS] Worker creates 2 SharedArrayBuffers. (one for shared states and the other for audio data)
- [DWGS] Worker sends SharedArrayBuffer references to AudioWorkletNode.
- [Main] AudioWorkletNode sends SharedArrayBuffer references to AudioWorkletProcessor.
- [AWGS] AudioWorkletProcessor notifies AudioWorkletNode that the setup is completed.
Once the initialization is completed,
to get called. The following is what should happen in each iteration of the
AudioWorkletProcessor.process(inputs, outputs)gets called for every render quantum.
inputswill be pushed into Input SAB.
outputswill be filled by consuming audio data in Output SAB.
- Updates States SAB with new buffer indexes accordingly.
- If Output SAB gets close to underflow threshold, Wake Worker to render more audio data.
- [DWGS] Worker waits (sleeps) for the wake signal from
AudioWorkletProcessor.process(). When it wakes up:
- Fetches buffer indexes from States SAB.
- Run the process function with data from Input SAB to fill Output SAB.
- Updates States SAB with buffer indexes accordingly.
- Goes to sleep and wait for the next signal.
The example code can be found here, but note that the SharedArrayBuffer experimental flag must be enabled for this demo to work. The code was written with pure JS code for simplicity, but it can be replaced with WebAssembly code if needed. Such case should be handled with extra care by wrapping memory management with HeapAudioBuffer class.
The ultimate goal of the Audio Worklet is to make the Web Audio API truly "extensible". A multi-year effort went into its design to make it possible to implement the rest of Web Audio API with the Audio Worklet. In turn, now we have higher complexity in its design and this can be an unexpected challenge.
Fortunately, the reason for such complexity is purely to empower developers. Being able to run WebAssembly on AudioWorkletGlobalScope unlocks huge potential for high-performance audio processing on the web. For large-scale audio applications written in C or C++, using an Audio Worklet with SharedArrayBuffers and Workers can be an attractive option to explore.
Special thanks to Chris Wilson, Jason Miller, Joshua Bell and Raymond Toy for reviewing a draft of this article and giving insightful feedback.